ALUMINUM YARD STICK
- Flexible tempered aluminum
- Calibrated 1/8" on one edge and millimeters
on the other edge
- Inch/Metric conversion chart on the body
- Printed on one side only
- 090" thick X 1-1/4" wide
- Easy to read numbers
|
|
STRAIGHT EDGE RULER - ENGLISH
- Flexible tempered aluminum
- Calibrated to 1/8” on one edge, 1/16” on
the other edge
- Printed on one side only
- Easy to read numbers
|
HEAVY DUTY DRY WALL T-SQUARE
- Tempered aluminum blade is 3/16" X 2" X 48" or 54"
- Notched head allows cutting or marking the full length in one motion
- Large easy to read numbers
; |
DRYWALL HAWK
- Made from heavy gauge aluminum
- Light weight but durable
- Used for holding plaster during application
- Long wearing
- Corners are rounded for safety
- Flange is secured by 6 rivets and reinforced
- Sponge rubber callous preventor
|
ANGLE SQUARE
- Molded graduations
- All three edges are milled for marking accuracy
|
CARPENTER SQUARE
- Features a 24” X 2” body with 16” X 1-1/2” tongue
- 1/8” graduations front and back
- Permanently impressed characters
- Corrosion-resistant finish
|
RAFTER SQUARE
- Features a 24” X 2” body with 16” X 1-1/2” tongue
- 1/8” graduations both sides
- Rafter table and Esses board measure
- Permanently impressed characters
- Corrosion-resistant finish
|
GROOVER
- Hardwood handle
- Curved up on both ends with center blade to cut groove ½” deep by 3/8” wide on a 3/8” radius
- Made in the USA
|
EDGER
- Professional quality cast aluminum
- Hardwood handle
- Curved up at both ends
- Blade cuts 5/8” deep on a 3/8” radius
- Made in the USA
|
UTILITY KNIFE BLADES
- Made from .025” cutlery steel
- Fit utility knife model 950
|
RETRACTABLE UTILITY KNIFE
- Heavy duty grade knife
- All working parts are metal
- Adjusts to 3 positions
- Engineered to accept any utility blade
|
REPAIR PARTS
|
INSIDE CORNER TROWEL
- Lightweight tool made from one piece of flexible steel
- Fitted with a comfortable hardwood handle
- Blade set at 103º to form a perfect 90º finish
- Used to embed tape and smooth out the final layer of mud to taped corners
|
UTILITY SAW
- Hardwood handle with steel ferrule
- Rugged steel blade with eight teeth per inch
- Sharp point can penetrate wallboard without drilling
- Cuts wallboard, masonite, plywood, and wood
|
COMBINATION PAINT TOOL
- Blade is made of high carbon steel
- Full length tang goes through the rugged solvent-resistant nylon handle
- Five tools in one: scraper, putty remover, roller cleaner, spreader, and a crack opener
|
FINISHING TROWEL
- Guaranteed to stay flat use after use
- Withstands pressure of hard trawling
- Flat blade makes application easier with more consistent finish
- Cast aluminum alloy mounting
- Securely fastened to tempered fully polished steel blade
- Curved plastic handle
|
HAND SANDER
- Comfortable lightweight tool
- Exclusive one piece handle clamp design makes for easy use and holds the sandpaper firmly in place
- For use with die-cut or half sheet of standard sandpaper
|
JOINT KNIFE
- Flexible blade of high carbon steel
- Blade is tempered then polished to a mirror finish
- Full length tang goes through rugged solvent resistant nylon handle
- Handle has a striking head for setting drywall nails
|
TAPING KNIFE
- Premium stainless steel blade and backing plate
- Temper weld construction improves holding power
- Blade flexes just right for feathering but won’t take a set
- Handle will not crack, splinter, or break
|
MUD PAN
- Made from stainless steel
- Tapered ends and sides with mud tight seams
- Sides are sheared to clean knives easily
|
POLE SANDER
- Made of reinforced die-cast aluminum bonded to a foam rubber pad
- Fast, positive clamps lock securely to hold the sandpaper in place
- Used for sanding drywall joints
- Combining this sander with our pole sander handle permits sanding anywhere
|
BUILT UP TO A QUALITY ...
NOT DOWN TO A PRICE!
|
